Wifi ipphone

Our peripheral can host a network, but we'd like to avoid making the user leave our app to go to Settings to connect to our peripheral. It seems the WiTap sample code requires all instances to be on the same network already, is that correct?

Note the only requirement is that they each must be new enough to have a Lightning connector. Peer-to-peer Wi-Fi support is not tied to the Lightning connector, it's just a helpful coincidence that the hardware that supports peer-to-peer Wi-Fi also happens to have a Lightning connector and thus it's an easy way to identify that support.

Ah, this is the first mention of non-Apple hardware in this thread. The situation with non-Apple hardware is more challenging because the peer-to-peer networking protocols both Wi-Fi and Bluetooth are not documented for third-party use. In a typical home accessory setup you want the accessory to join the same infrastructure Wi-Fi as all the other devices in the home.

This lets an iOS device pass its Wi-Fi configuration to the accessory so that the accessory can join the same Wi-Fi network as the iOS device is currently on.

HomeKit accessories, also created under the aegis of MFi, have their own set of capabilities. Most other ad hoc and peer-to-peer Wi-Fi scenarios do not have good solutions. You can generally make things work, but it tends to be a manual process. Is there or will there be support for "ad-hoc" Airplay audio today? I tried to use wi-fi direct with Wi-Tap as you outlined in your previous message but have discovered a problem with it.

After about 1 minute of no tapping on either device, taps are no longer being received. If you keep tapping every second or so there is no problem and the data continues to be sent and received, however once you stop this repeated tapping the problem occurs after about 5 seconds. We see the exact same issue with our own peer to peer product after we updated it to use wi-fi direct. After about 45 seconds of no activity ie no transmission of any data from either device , data is no longer being received.

If we send a "keep-alive" packet every second it works continously. If we change the keep-alive delay to 5 seconds it fails. In my case, I'm developping a device that I would like to connect to very easily without any infrastructure. At the beggining I though of Bluetooth but the speed of the connection isn't high enough. Below, we will show you how to get Wifi password from iPhone by introducing various apps and tweaks you can use on a jailbroken iDevice:.

The steps we have outlined below should show you how to get Wifi password from iPhone using NetworkList:. You should be able to view all the Wifi networks you had connected to previously. Also, their passwords will be visible. The steps we have outlined below will help you learn how to show Wifi password on iPhone through an app known as WiFi Passwords.

Wifi Passwords makes it extremely easy for iDevice users to find Wifi password on iPhone. Step 1 : From the home screen, locate Cydia and tap on it. Search for Wifi Passwords. Before you install Wifi Passwords on your iPad or iPhone, you may need to install some sources on Cydia. Step 2 : After adding the source described in step 1 above, go ahead and install Wifi Passwords by simply tapping on the install tab.

The install tab should be available on the top-right corner. Step 3 : After the installation, tap Return to Cydia. Next, return to the home screen.

Step 4 : Launch the Wifi Passwords application to access all your Wifi networks and their passwords. To learn how to see Wifi password on iPhone using iSpeedTouchpad, follow the simple steps we have outlined below:.

Tap on the application from the results which appear and then install it. Step 3 : After the installation is complete, click Return to Cydia and then return back to home. Step 4 : Run iSpeedTouchpad and search for all the currently available networks. When the network whose password you want appears, click on it. The app should display all the passwords available for the Wifi network.

One feature that makes this app stand out is that it has the ability to hack the password for Wifi networks that you are not close to. To know how to get Wifi password from iPhone using Speedssid, you need to follow the steps we have described below.

Step 1 : Launch Cydia and search for Speedssid. The app should appear in the results list. Tap on the app and install it on your iPhone. Step 2 : Launch the app and follow the onscreen instructions to get the Wi-Fi password for your preferred Wifi network. Published Date: October 26, Yes No. Character limit: Maximum character limit is